Aluminum joinery is designed to look good and last, with a little care and cleaning your Aluminum joinery will last many years.
Airborne salts along with dirt can all accumulate over time, and this mixed with moisture in the air can start to cause corrosion. So regular cleaning once every 12 months or more frequently if near beach fronts, geothermal areas should be carried out to remove the build up and maintain the condition of your joinery.
For anodised surfaces, with light dirt accumulation, clean with water and a mild house hold detergent. For tougher stains or light marks, gentle rubbing with scotch brite pads will generally do the trick.
For powder coated surfaces, use a soft brush or damp cloth. A mild cutting compound as available from AWS can be used very carefully to restore the surface. Ensuring surface is throughly rinsed afterwards to remove compound.
Do not use:
- Strong solvent cleaners.
- Abrasive pads such as steel wool, scrapers or scouring liquids.
- Petrol chemical liquids.
We have touch-up paint for repairing powder-coated joinery.
15ml.container with applicator brush.
standard colours,$14.00incl.
non-standard colours,$22.00incl.
special colours - quoted.
also spray cans
If you have any questions please contact us.
| < Prev | Next > |
|---|
